System Thread Exeption not handled error occurs after reboot when I run the SCCM image capture wizard.

I'm trying to capture an image of 32-bit Windows 7. My prepared machine is on a VMware Workstation VM using VMware version 7.1.6. The host machine is a Dell Presision 7810 with 2 Intel Xeon E-2603 v3 processors, 24Gb of ram, running 64-bit Windows 7. After running the Image Capture Wizard and the machine reboots, I get the error "System_Thread_Exeption_not_handled and no other clues. Can someone help me troubleshoot this? I Have included a video to show what is happening. https://www.youtube.com/watch?v=3Bkim24yn2s



Somehow the WAIK on my server was updated from version 7 to version 8.1. After updating my Windows PE and rebuilding my boot images using the new PE version, I was able to get things working again.



Found this: http://www.itwalkthru.com/2011/06/stop-0x0000005d-on-vmware-when-using.html
Could be of some use?

The other thing you can try is when WinPE is booting, it should dump all logs of its actions to C:MININTSMSOSDOSDLOGS. Try getting to the C drive (may have to use another WinPE disc to do this) and see if you can copy off the logs and inspect them. Then you can open them with Trace32 from SCCM or notepad (Trace32 will be easier to read).



Adam,

Thank you for replying. Tried both suggestions in your post. The first suggestion changing the VM to a 64 bit machine in the settings did not work. The only difference with it was that the error change to "UNEXPECTED_KERNEL_MODE_TRAP" Isee attached screen capture. As fare a second suggestion of viewing the log files, the C:MININTSMSOSDSODLOGS folder does not seem to be on on the machine I am trying to capture. I'm really stuck and not sure what direction to take now.



How much memory is allocated to the VM? 4GB should be a safe bet.

Also, are you leaving the VM integration tools in the image before capture? If so, trying removing them before the capture.



Adam,

Thank you for responding. I've had the VM set at 2GB and later at 4GB. I've tried removing the integration tools without any luck there either. I've included a smsts.log file and a screenshot of the contents of the C: drive.



I'm out of ideas. I do have a base image based on Windows 7 x86 that I've successfully captured/sysprepped using HyperV. Nothing fancy...just the standard fare of Office, ESET, 7zip, etc.

Share this

Related Posts

There was an error in this gadget