Vmware host only network with different subnet

I would like to have a communication between 2 VMs in VMware. I am running VMWare11
VM1 192.168.1.0 network IP.192.168.1.10
VM2 192.168.1.0 network IP.192.168.1.11
VM3 192.168.2.0 network IP.192.168.2.10
VM4 192.168.2.0 network IP.192.168.2.11

How to have connection between these VMs with out a layer3 hardware?

Your guidance is apprecaiated
Thanks



Since they seem to be on a different subnet you cannot make them communicate with eachother without either using routing or expanding the subnet to 255.255.0.0 (or similar)...

Have you thought about using something a small software virtual router? Something like FREESCO



Since they seem to be on a different subnet you cannot make them communicate with eachother without either using routing or expanding the subnet to 255.255.0.0 (or similar)...

Have you thought about using something a small software virtual router? Something like FREESCO



I have seen this FREESCO
but I could not setup as a VM
Even I could not login as I am not sure about default username and password
I tried below passwords
admin admin
admin vmware



The user name and password should be following, but just for the ovf one mentioned in the link below:
Username: Admin Password: vmware
And for the shell login: Root/vmware

There should be an ovf downloadable here, this way you can deploy it ready for configuration.



Many thanks for the URL
I imported teh OVA and logged in to the Freesco shell.
Now how to make connectivity between these VMs?



For configuration you can find some more info here

But basically you configure the first network as gateway (e.g 192.168.1.1) for the first subnet IP.192.168.1.10, then create a second network for 192.168.2.x ... With as gateway 192.168.2.1 for example.

Share this

Related Posts

There was an error in this gadget